

Btw, John Romero was the lead designer for Doom, Wolfenstein 3D, and Quake. He’s basically one of the inventors of the FPS genre. Way to go, Microsoft…
Btw, John Romero was the lead designer for Doom, Wolfenstein 3D, and Quake. He’s basically one of the inventors of the FPS genre. Way to go, Microsoft…
Yeah, if the nozzle is hitting the part, then it’s very likely a cooling issue. If an steep overhang isn’t cooled properly, it’ll curl upwards.
Either you’re printing too hot, or the fan is too slow or failing. For PLA, you can leave the fan at 100% after the first or second layer, and print between 195 and 205°C. Printing too fast also means the fan may struggle with the amount of hot plastic.
Can you paste your slicer settings?
Remember when Google’s motto was “Don’t be evil”?
Lower the Z offset. Not by too much, or it’ll scratch the bed.
“Everything is failing” is not useful info at all. Post a video of the failure happening if you don’t know how to describe it.
Any videos of when the print fails? Is it all prints or just the Benchy? Does it always fail at the same height?
From the available info, I’d guess it got knocked off the bed because the nozzle hit the curled overhang, which indicates the first layer is too high, decreasing adhesion, and the fan is not blowing enough, so the overhangs don’t cool enough, which allows them to curl upwards and get in the way of the nozzle.
More info = better diagnosis.
systemd, the solution for all Linux issues.
Or so they said…
Everyone said that about Wayland a decade ago…
Users move on from Windows because of old hardware compatibility, pick an easy to use distro, like Fedora. Fedora drops old hardware compatibility…
It’s their second attempt in under a month. Red Hat needs to sit the fuck down.
Never enough alternatives
That’s the neat part, if anything’s broken, just update, it’s probably fixed in a next version already. Then, when you find what broke on the last update, just update again, it’ll be fixed by then.
And now you’re lost
“Then buy me this game”
“No”
new installs and upgrades could sometimes take more than a day
Laughs in Windows…
Or just use an ABL probe and skip all the speculation.
Used to be Destiny 2, just after launch.
It became the worst case of pay to win I’ve ever known…
The Lyon does not concern himself with closed source bullshit 🗿
All I know is they took down the ones by LTT and Jeff Geerling, I can only assume it was due to the larger audience those two attracted. Now imagine PewDiePie…
Assuming prusaslicer, go to print speed settings, and look for “slow down on overhangs”. Also, under filament > cooling, there’s an option to increase fan speed on overhangs.
You can use the top left menu on the layer view to check that the fan and print speed are actually adapting properly to the overhangs.