Goal:

  • 16TB mirrored on 2 drives (raid 1)
  • Hardware raid?
  • Immich, Jellyfin and Nextcloud. (All docker)
  • N100, 8+ GB RAM
  • 500gb boot drive ssd
  • 4 HDD bays, start with using 2

Questions:

  • Which os?
    • My though was to use hardware raid, and just set that up for the 2 hdds, then boot off an ssd with Debian (very familiar, and use it for current server which has 30+ docker containers. Basically I like and am good at docker so would like to stick to Debian+docker. But if hardware raid isn’t the best option for HDDs now a days, I’ll learn the better thing)
  • Which drives? Renewed or refurb are half the cost, so should I buy extra used ones, and just be ready to swap when the fail?
  • Which motherboard?
  • Which case?
  • monkeyman512@lemmy.world
    link
    fedilink
    English
    arrow-up
    28
    ·
    5 months ago

    You don’t want hardware raid. Some options you can research:

    • Mdadm - Linux software raid
    • ZFS - Combo raid and filesystem
    • Btrfs - A filesystem that can also do raid things

    Some OS options to consider:

    • Debian - good if you want to learn to do everything yourself
    • Truenas Scale - Comercial NAS OS. I bit of work to get started, but very stable once going.
    • Unraid - Enthusiast focused NAS OS. Not as stable as Truenas, but easier to get started and a lot of community support.

    There are probably other software/OS’s to consider, but those are the ones I have any experience with. I personally use ZFS on Truenas with a lot of help from this YouTube channel. https://youtube.com/@lawrencesystems?si=O1Z4BuEjogjdsslF

    • tburkhol@lemmy.world
      link
      fedilink
      English
      arrow-up
      17
      ·
      5 months ago

      Ditto on hardware raid. Adding a hardware controller just inserts a potentially catastrophic point of failure. With software raid and raid-likes, you can probably recover/rebuild, and it’s not like the overhead is the big burden it was back in the 90s.

      • JustARegularNerd@aussie.zone
        link
        fedilink
        English
        arrow-up
        2
        ·
        5 months ago

        I got a server from ewaste because the RAID card did fail and having SAS drives they couldn’t even pull data from it with anything else. It was the domain controller and NAS so as you can imagine, very disruptive to the business. As they should they had an offsite backup of the system and so we just restored onto a gaming PC as a temporary solution until we moved them to M365 instead.

        I just use software RAID on it now and so far so good for about 180 days.

        • lud@lemm.ee
          link
          fedilink
          English
          arrow-up
          1
          ·
          5 months ago

          It was the domain controller

          Bruh are you telling me they only had a single DC?

          You need a minimum of two.

          Also putting general storage on a DC is a really bad idea. The VM or machine running ADDS should run exclusively ADDS (and required services like DNS)

          • JustARegularNerd@aussie.zone
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            5 months ago

            This all happened two weeks before I started, so I don’t know the exact details. If it was set up the way I think it was, I’d say yes, the DC was in it’s own VM and then a separate VM would’ve been used as a NAS. Of course being hardware RAID the whole host server went down when that card failed.

            They probably didn’t have a second DC set up due to the DEFCON 5 levels of “We can’t work!”

            They were ultimately planning on going to the cloud anyway from what I heard and that catastrophe just accelerated that plan ahead

    • unrushed233@lemmings.world
      link
      fedilink
      English
      arrow-up
      7
      ·
      5 months ago

      Just want to mention that TrueNAS is FOSS and unRAID is not. And I wouldn’t necessarily say that unRAID is much easier.

    • ShortN0te@lemmy.ml
      link
      fedilink
      English
      arrow-up
      3
      ·
      5 months ago
      • Truenas Scale - Comercial NAS OS. I bit of work to get started, but very stable once going.
      • Unraid - Enthusiast focused NAS OS. Not as stable as Truenas, but easier to get started and a lot of community support.

      Since OP wants to use Docker i would not recommend either. Trunas scale does not support it usefully and the implementation in Unraid is also weird. Also the main benefit of unraid is the mixing of drives, OP wants to raid.

      • Krill@feddit.uk
        link
        fedilink
        English
        arrow-up
        1
        ·
        5 months ago

        TrueNAS Scale will have Docker in the next release in August, along with the ability to expand Vdevs.

        • ShortN0te@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          5 months ago

          I am aware of vdev expansion since i am following it closely but not heard about docker support, thanks for that new, i will read into it. Would be actually a game changer for a project i am planning.

    • TheHolm@aussie.zone
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      2
      ·
      5 months ago

      I would add LVM to the list of software raids, and remove btrfs as poorly engineered.