I won a bambu as a gift because I had a chinese printer that never worked and wanted something easy and “dumb friendly” no more days amd days looking up a problem. Well mine came with a problem and after 12 HOURS i still wasn’t able to load a filament. Reading about bambu support I realized I was going to spend a REALLY long time and they wouldn’t fix it so I just returned for a full refund. I’m very frustrated and almost giving up 3d printing all together because it’s the second defective printer I get.
Edit: Hey guys just want to give some context. I have been printing for more than 6 years, and I have resin and filament printers. My first filament printer was a Biqu B1 and it came with a defective board (support agrees). I had to replace pieces from the get go and it does’t have a correct temp reading (It only prints PLA at 260⁰ and it’s not 260⁰ but it doesn’t show a correct consistent temp reading) and also doesn’t pause. Sometimes it will just stop and restart in the midle of a print. All that work and time traumatized me when it comes to fdm printing. I do a lot of resin tho. My brother saw people saying how great bambu was and gave me one because of it. I’m not a begginer, I did contact support with videos of the problem and they said it did look like an issue (the machine sensors don’t recognize the filament and keeps giving “fillament is over” everytime)
Anyway, after all that I didn’t want to go through support all over again with a brand new machine, and I was pretty frustrated because of my bad luck, so I just ranted here.
Thank you for the ones with kind and helpful words, I did end up buying a Crealty in another store. Lets try again, third time is the charm


Snapmaker U1, incredible printer. Easy to use. I don’t know about the support because I’ve never needed it. I have a couple of thousand hours on it so far and my bambu just sits in the corner gathering dust
I have a printer farm with a bunch of Prusas, an H2C and recently we bought two U1s.
The U1 has a success sheet behind it and it’s over 42 prints in just a month. Very complex prints of protein models.
Thanks for the mention. I’m not into 3D printing yet, but had looked around to get familiar with things and was going to settle for a single color type since the whole poop thing seems ridiculous if you can’t easily capture that waste back. Looking at this one, it makes sense to spend a bit more to get multiple heads to do different colors and material at once. Imagine if color printing on paper had you spit out a bunch of one color into the trash to switch to a new one.
multiple toolhead printers still use a purge tower which is waste.
I usually purge into the fill and support, and the poop is almost non-existent
Its not as bad as you think especially when you’re comparing them to lower quality printers that cause you to throw a bunch of half finished prints in the trash due to print errors. You can also avoid this if you use/make models that have the colored parts split out so you’re only printing one color at a time, or minimize waste by printing multiples of whatever multicolored object you’re printing. The waste is the same whether you’re printing 1 or 50.
Some prints its unavoidable, but I certainly feel like I’ve wasted way less plastic with my Bambu printers than I did with the bed slinger I had before it.
Multiple toolheads are probably the better way to go but these introduce their own issues and can lead to print failures as well since they’re way more complex than a single toolhead.