What do you guys think of the idea of smart homes? I could make a basic setup using https://home-assistant.io to control my home temperature and lighting; the tools for doing this are everywhere nowadays and implementation doesn’t seem too horrific anymore.
But setting aside what I “can” do, is this something that I “should” do? How can a person implement this without connecting any devices to the internet?
You must log in or register to comment.
I’ve been using Home Assistant for a while now. I do recommend setting up a VLAN that can’t communicate with the internet which is where any wifi devices live. However I really like ZigBee and/or Z-Wave devices as they don’t require any internet connection.
Lights alone are a game changer. Timers never really worked well for us because we’re pretty far north of the equator and sunrises/sunsets have a pretty big swing. I currently have the lights come on 1 hour before sunset so it adjusts to this swing without me having to do anything. Then I have a button on my nightstand that turns off all the lights that aren’t night lights.
The downsides are that it can be expensive. You start with a couple of light bulbs, maybe a couple of outlets, next thing you know you are pricing out how much it will cost to change all your switches and trying to figure out if they all have neutral wires or not. You’ll start watching youtube videos of people’s setups and looking for ways to do more with your smart home. It’s a fun hobby but can be a lot of work.
I like that the ZigBee and z-wave devices don’t need internet, but the biggest reason in my opinion is the relay function where they extend the network, and the binding options so they work even if your hub or wireless goes down.
Yeah, the mesh features is really nice.
Smart homes sound good in concept and I’d love to have one if there weren’t so many risks. But an entire home that can be controlled via computers just sounds like an opsec nightmare. Obviously there’s the plus that your average technologically illiterate granny isn’t going to be using these so it will most likely have strong security systems. But hackers love a challenge.
And a whole neighborhood? A systemwide attack could happen disrupting entire swaths of a city’s residential zone. Imagine showers suddenly spraying boiling water, targeted attacks on epileptic individuals with flashing lights, temperatures dropping to below freezing or up to dangerous levels of heat or lightbulbs overloading sending broken glass everywhere, speakers bursting eardrums.
Not to mention more subtle dangers of such voice activation systems being accessed by malicious actors, or more likely, corporate concerns. Someone gangstalked or targeted by powerful people who could just court order one of these smart home companies to hand over the data and they probably will without fuss.
The attack surface of a single electronic device is massive, with dozens of different apps and services, each with different system vulnerabilities to exploit that’s already hard enough. But just imagine the attack surface of an entire home! Everything from the LG Flatscreen in your living room, to the temperature control systems, to your Apple Smart Toaster can be hacked to gain access to the rest of the system. If any one of those isn’t completely secure (which of course is a pipe dream) then it could be the gateway to a smart home hacking story on a Defcon panel.
And finally, what’s stopping the company from just updating the software for your smart home and paylocking features like “Uh yeah, you need to pay 12.99$ a month to have your cctv cameras work.” And because all the framework that runs the systems is being hosted in proprietary servers, you can’t do shit. And you can’t host your own servers either. Does this sound familiar because it should?
To be fair, many of those problems are things you can mitigate by picking the right vendor and staying away from anything that needs to phone home or use the internet
What’s stopping the company from just updating the software
The fact that I buy zwave stuff designed never to connects to the internet
And you can’t host your own servers either
Home Assistant says otherwise
This. I have been slowly building my smart home for the last 4-5 years, and I’ve yet to have a dead piece of equipment outside of a failed plug-in outlet. Since i do run everything through home assistant, there isn’t really any worry on my end up about longer term support, and if something does break in 10 years then whatever, I got 10 years of automation and a fun hobby and I’ll just replace it with the switches and shit that I took out to begin with. But because my house is now built around zigbee and home assistant, the only thing I actually have to worry about is HASS going away.
I mean, sure, I’ll probably upgrade to other things over time anyway, but that is the nature of technology. I mean, I’m sure these articles have been written but this thread is the equivalent of “laptops - computers are already fine, isn’t it just going to be a headache to carry one with you?” Ditto for modern mobile phones.
Yeah, my favorite part is the stability, honestly. I don’t have my HA instance facing the internet in any way, only accessible via my Nebula overlay network. No pressure to update the OS regularly or expect that I’m suddenly going to lose features because some big tech company decided they wanted to paywall or disable it in an update.
The fact that I moved earlier this year and was able to bring my whole smart home setup with me, and have it working at the new house before we even had an Internet connection is just golden.
Okay that’s fair, you bring up good points. I’m actually glad there are counter to my points. Thanks 👍.
This sounds more and more like Watch Dogs 2 and HAUM
I was think about it when I was writing it XD.
Smart homes in centralized hands, such as Google? Nightmare.
Smart homes controled from your home, like home assistant? Awesome. I have home assistant and done some lights, water sensor, even my security cameras. It’s a lot of work, but it works so well it’s crazy.
I sorta wonder about these when selling the house to the next person. What if a little old lady buys your house?
I thought I’d remove them if the buyer isn’t interested. They still work like normal light switches without a smart home hub.
As others have said, you can sequester IoT devices to a VLAN that has no internet access. Most of the common devices (lights, switches, sensors) added to smart homes work perfectly fine without access to the internet. Voice assistants are the biggest security/privacy hole since all commercial options are from big tech companies and phone home constantly. If you set up a local homeassistant instance you can get a ton of functionality out of smart devices with no direct connection to the internet. You need to decide how you handle accessing homeassistant from outside your home if that’s something you want but there are plenty of options to choose from for that.
One thing I will say that I refuse to add to my home is any kind of smart locks. No matter how much I trust my security setup, I don’t trust it with the ability to unlock my doors. If there was one that could only lock them electronically but required being manually unlocked, them maybe. But I haven’t seen a lock like that out there.
Agreed on all points.
I just wanted to add that I’m very glad smart locks exist. My friend with cerebral palsy can now secure his home with a lock and be able to get back in independently.
In general, smart devices are huge for him, and others with physical disabilities.
Also, I should say that I really enjoy the convenience of having Google Assistant in the house. Verbal timers, alarms, reminders, podcasts, and music mostly. Those and the pirate FireTV Stick are our only devices to date. I just don’t care enough to put the legwork in to getting IoT set up. Switches are fine.
That’s great that they help your friend like that! As someone that doesn’t face any kind of accessibility issues myself, it’s easy to overlook those kinds of benefits that these devices can provide. In situations like your friend’s, I’d agree that any potential security cons are outweighed by the pros (especially if the alternative before was having to leave the doors unlocked anyways).
Agree on the convenience of voice assistants. I’ve got various models of Google homes in my house that I use for voice controls on anything I don’t have a good way to truly automate. Different people will have different tolerances for how okay they are with the data things like that can gather. One day I might try to set up one of the local network voice assistants but those can take a lot of work to get just right. Always a tradeoff of convenience and privacy.
Oh that’s interesting. Does Google Home work on an unconnected VLAN for lights? I use it for lights and kitchen timers. I don’t see myself adding anything more complicated or invasive though.
I don’t think Google home would work without an internet connection. I believe google devices and the google home app expect a connection to Google’s servers.
I personally use homeassistant to control everything without an external internet connection and I know you can lock Philips Hue lights off from the internet and the official Hue app will still work.
Or better yet: only use zigbee devices which work offline without the need to access your wifi network.
Just remember, the S in IOT stands for security.
I do have some IOT devices on my network, however they are kept off the internet and on their own vlan. No phoning home (or anywhere else) for these devices.
They can be great if they are set up properly, but too many people just take them out of the box, toss them on their network and think they are just fine.
I’d wager 90% of users do that. I see way too much phoning home former to ever be comfortable with that.
I’m a bit more pessimistic about that percentage… maybe 90% of people with the technical ability and inclination to micromanage their devices. But I’d wager the majority of users just want a remote control mood light and do not care that it’s using the WiFi
I don’t see anyone in here talking about HomeKit, which is also a good solution for secure IOT. Many HomeKit accessories can be set up to only communicate with your LAN and to not need 3rd party apps or accounts.
I also have my system connect to a router that supports HomeKit secure, which blocks any phoning home to 3rd parties.
Big problem with HomeKit is 1) Siri is meh 2) fewer IOT accessories
The S in IoT stands for security
That’s actually what I made the SSID for the wireless access point for the VLAN i have isolated for any wifi specific smart devices.
I didn’t buy any, but my wife did without realizing they were incompatible with my existing home assistant setup due to being cheap Chinese crap
If you’re smart about it, doing home automation can be really rewarding and useful. Automating lights to turn on when it gets dark is probably the most useful thing. I also have a window fan to bring in cool night air, which automatically clicks off at 60°. All of this runs locally on a raspberry pi via home assistant and z-wave, no sus devices on my network!
I’ve been using smarthome stuff for quite a while now, and my conclusion is this:
- You absolutely have to stay local. Home Assistant is the only software I know that can pull that off at the moment, but never ever use commercial devices that have to talk to their servers. Once the servers are down or your internet connection is down, those devices are just bricks, and you don’t want that at home.
- The setup is only really usable by the person who set it up. If you’re living alone that’s fine, but anybody else will have a hard time tapping in your secret code to turn on the lights. All trained behavior like pushing a light switch to turn the lights on and off are violated in a smart home, even if it’s just because the delay between pushing the button and the lights going on is increased by 100ms.
- You have to monitor battery levels of sensors and replace them to keep the system working. There are dozens of coin cells in your home, they are going to run out eventually (after a few months).
- Have a fallback mechanism when the network goes down. It’s not great when you can’t turn on the lights to check why the WiFi router isn’t responding.
All trained behavior like pushing a light switch to turn the lights on and off are violated in a smart home, even if it’s just because the delay between pushing the button and the lights going on is increased by 100ms.
This is only true if you’re controlling bulbs instead of switches. Virtually all of my lights are on z-wave switches that work almost exactly the same as regular switches, the only difference being that the switch paddle doesn’t stick in an on or off position. Smart control is strictly in addition to the primary control.
Completely agreed on your other points, though. Absolutely no chance I’d use anything other that a local Home Assistant server that handles all processing locally.
I’ve installed an Aqara wall switch in a public room, and people are complaining that it doesn’t feel as well as a regular light switch. It’s really hard to get it right.
Yeah, unfortunately there’s not much that can be done there, at least not without adding little motors to the switch so it can match state with whatever it’s controlling. My experience has been that there’s an adjustment period, but eventually it’s not a big deal. Sort of like switching to paddle switches from toggle switches; at first it’s different, and people don’t like different when it comes to things they don’t think about, like light switches. But eventually the new thing becomes normal, and it’s not a problem anymore.
That said, the z-wave toggle switches are garbage, it’s much easier to adjust to paddles.
You can connect devices locally now. Eg. Zigbee/Z-wave network protocol without the need to use the internet. I know some builders started to implement smart devices for Apartments in the city which is easy to set the standards but for individual homes, would be harder to sell as it’s costly…
Smarthome well done is good and I think it will be necessary to tackle some challenges of the future - we need smart solutions to use ressources much more efficiently.
But: 85% of all smart home products are neither smart nor good. They are glorified remote controls. Nothing more.
AMAZON ALEXA IS NOT A SMART HOME PRODUCT.
A smart house doesn’t need you to use your phone/voice/etc. to turn down the blinds or switch on a light. It knows when the blinds need to be where depending on your location, the weather (blind based cooling in summer, heating in winter), the time, etc. It inherently doesn’t need a internet connection to control itself - it only does need the internet to expand its knowledge of the outside world,e.g. by getting disaster alerts, weather forecasts or off-site-location. When done this way there isn’t much “hacking” that can be done. There aren’t many components that can turn into botnets.
This is all possible for ages and it is all easily achieved - KNX and other systems are good examples. Matter can possibly achieve that. But currently it’s the big hype to call everything that can be voice controlled smart.
For fucks sake. It takes me longer to say “Alexa turn on the living room lights” than to do it myself or use a Clapping sensor from the 80ies.
I really like this statement I heard recently, which I think came from the YouTube Adventurous Way - “Dumb Control, Smart Monitoring”. Make sure that any devices you install have failure models that make sense - you should still be able to control your appliances when the network is down.
That said, the option to remotely control lights, etc is fantastic. I also recommend setting up some temperature sensors in various places - I have quite a few ESP33 boards scattered around with sensors (and and one with an IR blaster) attached.
Making sure you are still able to control everything when the network is down seems like a good idea.
In our house, the smart plugs have a physical button that can be used to toggle them on or off. The lights are still connected to a physical power switch, so they can be reset by flipping the switch a few times, in which case they will probably just act as a normal light. Air conditioning units have an IR remote.
All important automations should run fully locally. I also find that focused and simple automations are often most useful. When I say simple I mean in terms of automation logic, not necessarily in terms of interfacing devices, which can be tricky at times. Example of simple automations I like most would be switching amplifiers on/off based on audio state changes, switching lights on/off relative to sunset, and switching electric water and floor heating elements on/off depending on energy price.
I agree, I also make sure everything is fully local. I have separate subnets for the server that runs home assistant, the IoT devices, and the trusted home network. Then I have some firewall rules that ensure that the IoT network cannot communicate with the WAN or the trusted LAN network at all, only with home assistant.
We have some simple automations at home to turn on the boiler in the afternoon when we have an abundance of solar power, and some basic automation to turn off aquarium lights at night such that the fish can sleep. Anything more complex just becomes unreliable and annoying.
Harmful, the internet of things in general is.
You don’t need stuff that is 100% in a bot net caus its completely unsecured.
Great advice by Yoda!
𓁹‿𓁹
I’ve been using homeassistant since the start of the year and I’m never going back! Took a while to get the hang of it but being able to make my own smart electronics on the cheap is bloody awesome. Soldered my plug-in cannabis vape to an ESP32 microcontroller and now I can control its temperature from my phone!
None of my smart-home stuff is closed source which helps a lot with trust, and I’ve even tested it to ensure that everything works even if my flat’s internet goes down! Having all my light bulbs running the FOSS WLED firmware also means that I can hook them up to my HyperHDR setup so all the lighting in my room changes colour to match my TV.
I’m super interested in all these projects! Would you mind sharing guides you found helpful when designing and building then?
For HyperHDR I started with this guide along with a bunch of YouTube tutorials and a lot of trial and error given it was my first time soldering and first time using a microcontroller in a project!
With the cannabis vape I basically used the skills I learned making my HyperHDR setup along with a multimeter and the EspHome documentation (and even more trial and error) to emulate the potentiometer that was originally wired to the temperature controller and to control an LED I wired up to it.
Other than the official documentation the main thing that I found super helpful was the official HomeAssistant forums and (unfortunately) Reddit.
Thank you so much for all these details, this will help a ton! I taught myself to solder a few years ago to do custom LEDs in my kitchen and kid’s bedroom, and it was super fun. I’m really excited to try out some of the stuff you did, thanks again!
The rate at which the go obsolete is my issue. If you invest in a system, just be prepared to replace everything every five years, and there is almost nothing yoiu can ‘fix’…it is all disposable.
deleted by creator
Not all of them! I really like my athom smart home gear, everything they sell runs on FOSS firmware and they even have github repos to host any device-specific modifications! As long as WLED and EspHome continue supporting the ESP8266 my devices should keep getting updates!
I have a smart home and let me give you some advice. BE MINDFUL OF THE BRANDS YOU CHOOSE. For example, using tuya smart devices with home assistant is a pain, you have to setup a tuya cloud account and get an API key that you’ll have to renew every few months. If the device gets reset you have to go back into the cloud environment and re-add them. It’s such a pain. Almost anything works with home assistant, but the amount of diy and bullshit you have to deal with to get something working varies greatly between brands. I highly recommend sonoff, also get a zigabee controller for home assistant as its far better than using WiFi. I also recommend you start a notion document or some other form of document that can keep up with everything for you. What brand of switches are in what room, what brand of lights are where, etc. Not just for you but if you ever sell your home you can give it to the next guy. Because you’re probably not going to take the light switches or any in line relays with you.
Also to not connect to the internet you need to have a separate network (router or access point) that all your smart devices connect to. You’ll then use a VPN to connect to your home network remotely. Basically have your smart devices router hooked into your normal router and on your normal router block external traffic (the Internet) from going to the smart devices router. Sorry if that’s hard to follow but just Google “how to segment a home network” and that should get you started. Feel free to hmu if you need some guidance.
This is my current biggest gripe. You have to have a four year degree in random smart home garbage to figure out what works with what. We have a guy like that in our friend group, but I still need four different smart home apps just to control a handful of lights and a couple cameras. The apps have constant problems (Nest app signs me out nearly daily), the aggregator apps like Homekit and Google Home are missing nearly all features for the lights we have aside from on or off and some simple color settings, Nanoleaf app claims to be able to do scheduling and automation but I’ve never gotten it to work. I bought a google home tied-in tablet at the recommendation of said friend to be able to check cameras and control lights from a device that didn’t have to be biometrically locked, and it turned out it couldn’t see the cameras OR the lights. Pending some future theoretical update which still hasn’t rolled out. Insanity. Makes me want to throw it all out.
Considering how expensive the smart home items are, especially the lights, the user experience is horrendous for pretty much everything but flashy tech demos.
Everything became very easy for me once I decided to go all open source. In my opinion, the problem is all of the different proprietary “hubs”. I got a ZigBee controller that can control all ZigBee devices without requiring a hub (there are several options available).
Lights: ZigBee Hue. Plugs: ZigBee Innr. Motion sensors: ZigBee Aqara. Cameras: Ethernet Amcrest. NVR: Frigate.
Everything is local, no data leaves my network, and everything is controlled directly from Home Assistant dashboards via the ZigBee controller, and I never have to open any proprietary apps.
Care does need to be taken to plan the network at least somewhat in advance, but that doesn’t take too long, and everything is very stable and super reliable.
What is the ZigBee controller? Is the Hue Bridge one? Does the Hue bridge not go on the internet?
No, I am currently using a TubesZB Ethernet controller, but before that I used a Deconz ConBee II. There are others available as well.
I used the hue bridge before setting up HA, but after setting up and configuring the other controller, you can unpair your hue bulbs from the hue bridge and pair them with the new controller instead. You can then unplug the hue bridge, because the new controller is now handling the hue bulbs.
This is possible because devices that comply with the ZigBee protocol specs must accept properly formatted commands from a hub/controller after a successful pairing.
So if you have one of these controllers, AND the ZigBee device you purchase is compliant with the protocol AND the device is supported by the controller, the controller will be able to control the device locally, and you can throw out the “required” hub from the manufacturer that sends your data to that company’s servers. This is why you need to plan things out ahead of time, to ensure that what you get will work with what you have. Every controller has a list of what devices are supported. For example, here are the devices supported by the ConBee II, and here are the devices supported by the TubesZB device, which uses Zigbee2MQTT.
Bonus: with one of these controllers, your smart home stuff will now work just fine if your internet goes out. As long as your local network is up and running, all of your HA stuff will work as well.
Thanks for all this info. I’m just planning out what I will use. This gives me a lot to dig into!
Really glad to hear it! Feel free to ping me if you have questions.
Edit: The Deconz is a good starter device, but it doesn’t support nearly as many devices as Z2M. I got an Aqara Pet Feeder that Deconz doesn’t support, but Z2M does, which is why I switched. You can’t use Z2M with the ConBee.
This is the video I used to set up Z2M to work with the new controller.
I wish segmenting your IOT devices on their own virtual network was easier for most people to do. It can be done but you need a good working knowledge of firewall rules and networking in general.
LocalTuya is a thing, though it’s a bit of a pain in the ass and I would definitely not recommend buying Tuya hardware specifically to use with it.
Tried both LocalTuya and TuyaLocal. When they work it was fantastic, but eventually after a few days I run into problem where a smart device’s state would got stuck. For example, a switch’s state could get stuck in the
Onstate, and when you attempt to switch the light off, after a minute it’ll turn back on. Other devices would got stuck inOffstate, so after turning them on It’ll turn off again soon enough. I’ll get rid of them once I found a suitable zigbee devices that can replace their functionality.
I have a smart home. I run Unraid OS on my server and among a ton of dockers, I run my own VM with home assistant. Been doing my own DNS, network wide ad blocking, media server, home automation stuff for years now. Always will to help answer any questions.
I’m also disabled so the smart home really helps me.
As a fellow disabled person, so much this. Being able to automate things or access them with a simple voice command (or on my phone) takes a lot of weight off my shoulders.
