What helps people get comfortable on the command line?

Sometimes I talk to friends who need to use the command line, but are intimidated by it. I never really feel like I have good advice (I’ve been using the command line for too long), and so I asked some people on Mastodon:

if you just stopped being scared of the command line in the last year or three — what helped you?

This list is still a bit shorter than I would like, but I’m posting it in the hopes that I can collect some more answers. There obviously isn’t one single thing that works for everyone – different people take different paths.

I think there are three parts to getting comfortable: reducing risks, motivation and resources. I’ll start with risks, then a couple of motivations and then list some resources.

I’d add ImageMagick for image manipulation and conversion to the list. I use it to optimize jpg’s which led me to learn more about bash scripting.

  • liliumstar@lemmy.dbzer0.com
    8·
    1 year ago

    That’s a good article. From my observation, there are a few things:

    • Necessity. I’m active in communities with people who don’t use the terminal until it’s an absolute necessity. Like people running unraid, docker, or whatever containerized server. Eventually they need to type commands.
    • The prettiness. Yeah, I run oh-my-zsh. It’s nice having a setup pretty environment. Some people’s only experience might be opening up the powershell default display to run one command… And that is a bad experience.
    • Niche commands/programs. Take ffmpeg as an example. It’s probably the most powerful media tool that exists, but has no official gui. And it’s expansive enough that no GUI really covers what it can do. There are a bunch of other things like this.

    Edit: And yeah, git. I’ve never used a graphical client. Seen a handful in use and don’t like it.

    • StudioLE@programming.dev
      21·
      1 year ago

      You’ve never used a graphical git client?!

      I’m comfortable on the command line but a decent git UI is a way better experience.

      git diff is so basic using a GUI makes it far easier to compare changes.

      Same for merge conflicts. I’m not sure you can even resolve them on the CLI?

      Any form of rebase: I think I used the CLI to do an interactive rebase a few times in the early days but I’d never do so without a GUI now.

      Managing branches: perhaps I’m a little too ott but I keep a lot of branches preserved locally, a GUI provides a decent tree structure for them whereas I assume on the command line I’d just get a long list.

      Managing stashes: unless you just want to apply latest stash (which admittedly is almost always the case) then I’d much rather check what I’m applying through a GUI first.

      There are some things I still use the CLI for though:

      git remote add git remote set-url because I’m just too lazy to figure out how to do that in a GUI. It’s usually hidden away somewhere.

      git push --force because every GUI makes it such an effort. C’mon! I know what I’m doing - it’s /probably/ not going to mess things up…

      • Faresh@lemmy.mlEnglish
        3·
        1 year ago

        Same for merge conflicts. I’m not sure you can even resolve them on the CLI

        How are they solved when using a GUI? When using cli, it simply tells auto-merging failed and you can open the conflicting files in a text editor and solve the conflicts, then add them and continue the merge.

        Managing branches: perhaps I’m a little too ott but I keep a lot of branches preserved locally, a GUI provides a decent tree structure for them whereas I assume on the command line I’d just get a long list.

        git log --graph --all --oneline

        There’s also --pretty, but it uses a lot of screen space.

        Managing stashes: unless you just want to apply latest stash (which admittedly is almost always the case) then I’d much rather check what I’m applying through a GUI first.

        You can attach a message when stashing with -m.

        And you can check them out by doing git checkout stash@{1} or similar.

      • atheken@programming.dev
        3·
        1 year ago

        I use git on the CLI exclusively. I almost never rebase, but otherwise get by with about 5-10 commands. One that will totally change your experience is git add -p

        I also have my diff/mergetool configured to use kaleidoscope, but still do everything else in the CLI.

        • StudioLE@programming.dev
          3·
          1 year ago

          -p –patch

          Interactively choose hunks of patch between the index and the work tree and add them to the index. This gives the user a chance to review the difference before adding modified contents to the index.

          This effectively runs add --interactive, but bypasses the initial command menu and directly jumps to the patch subcommand. See “Interactive mode” for details.

          The documentation is entirely meaningless? What does it do?

          • atheken@programming.devEnglish
            3·
            1 year ago

            You can stage individual chunks of a file.

            Useful if you have a large set of changes you want to make separate commits for. I also just find that it’s a good way to do a review of each chunk before committing changes blindly.

            Give it a shot some time, worst case is you stage some stuff that you don’t want to commit, but it’s non-destructive.

            • StudioLE@programming.dev
              3·
              1 year ago

              I’ll occasionally

              1. stash my changes
              2. unstash them.
              3. Revise the file in my editor so only the chunk I want to commit is present
              4. Commit
              5. Unstash the changes again to get back the uncommitted change

              It’s clunky but it’s robust and safe. It does sound a lot cleaner to just use commit -p though

              • atheken@programming.devEnglish
                2·
                1 year ago

                Yeah, -p can help with that. I’m not much for “commit grooming” - as long as a branch merges to main cleanly and passes tests, I don’t care about an “ugly” commit history.

        • Faresh@lemmy.mlEnglish
          2·
          1 year ago

          git add -p is great to know, but IMO one shouldn’t rely on it too much, because one should strive committing early and often (which eliminates the need for that command). Also using git add -p has the risk of accidentally not adding some code that actually belongs to the change you are trying to commit. That has happened to me sometimes in the past and only later do I see that the changes I commited are broken because I excluded some code that I thought didn’t belong to that feature.

          • atheken@programming.devEnglish
            2·
            1 year ago

            There are other reasons to use it. A major one is doing a “code review” of changes before committing, or even deciding to drop a chunk of code from a commit entirely (like a debug statement that no longer is necessary.)

            I’m all about frequent commits (and right-sized commits), but the functionality can still be beneficial even in those scenarios.

            I also don’t care if I have a broken commit. This turns up very quickly, and there is zero expectation that feature branches are always in a working/stable state. The expectation is that pending work gets off the local machine on a regular interval.

      • liliumstar@lemmy.dbzer0.com
        2·
        1 year ago

        To be fair, I like to use VSCode for resolving merge conflicts, because it is easy to see the deviations and apply/edit as needed. Still, I use the CLI for everything else, including commiting that merge. Plus the gh cli client when I’m using github as I can create a repo or push a repo with zero effort.

        It is possible to resolve conflicts through any text editor, but not an amazing experience.

      • CodeMonkey@programming.dev
        2·
        1 year ago

        I also exclusively use the git CLI. I have tried to use a graphical client and could never figure out what it was doing and what was going on. I probably picked it up so easily because when I learned git, I was already used to using a CLI version control client. At the time, I was working at a company that heavily used Perforce and had a custom wrapper around the p4 cli that injected a bunch of custom configuration.