Having recently replaced my laptop (with a used Lenovo T495) and set it up to dual boot Win11 and Endeavor…Windows 11 was by far the most difficult and time consuming to get from “boot off installation media” to “open functional web browser”. Would have been even easier had I asked Endeavor to just use up all of the partition I left free from installing Windows.

So when I got the T495, I went through the Win 11 OOBE to check it out. Turned it off until I got the Ram upgrade for it in the mail. That was my first problem, because “turn off” doesn’t mean what you think it does in Windows. If you want to get to the Lenovo system settings/boot order/diagnostics, turns out you have to “restart”. Go figure.

Then I did the switcheroo with NVMes in my old T470s and the 495. Took my 1TB out of the 470 into the 495, and took the 256 that came with the 495 and put it in the 470.

Then go to start the 470 and it boots fine to Win 11 but I can’t login with my PIN because my PIN is now expired. I’d enter a password but it never even let me do that. I tried to connect to my wifi and it wouldn’t connect.

Obviously this is because the host system changed and the TPM isn’t there anymore, but still frustrating to not be able to use the laptop offline just the same. I ended up just formatting and installing Endeavor on that, too. This was just where I finally realized that “reboot” means “give me the option to change boot order this time”, because I couldn’t get back into BIOS after it booted to windows.